|
Black plastic double wheel castors used in domestic appliance applications
available in sizes 35mm and 45mm with removable attachment. Attachment can
be one of three types, plate, thread or pin. (codes: CP, CF, CL)
Castors of black plastic with fork support of forged zinc-plated steel
swivelling on a double ball ring. - Smooth sliding at full load,
wear-resisting, shook-proof, resisting temperature changes and many
chemicals.
Sizes available from stock and loading capacity: 30mm - 20Kgs. 40mm - 25Kgs. 50mm -
35Kgs.
Codes for this wheel : DP for plate and DF for thread (M8/M10)
Code : DSF - 40mm - 25Kgs. This is a fixed castors in black plastic - specs. similar to above models.
Code : DSFX - 35mm - 25Kgs. &
50mm - 60Kgs. This is a black plastic wheel with fixed housing of galvanised steel.
Code : MD - 35mm - 15Kgs. &
45mm - 18Kgs.
Attachments : Plate or thread. (MDP or MDF).
This type of wheel is for use with middle furniture (capacity per
wheel not over 18Kgs.) Support of forged steel sheet, swivelling on a
bushing. Chromed.
 SCP - Black thermoplastic hub,
with black rubber tyre.
Zinc plated pressed steel, swivel housing, plate fitted,
with double ball race.
(Available on request with thread).

TRANPORT
SERIES: Wheels for
Institutional applications. Wheels of grey NON MARKING rubber
designated by the initials TB and wheels of Nylon made from Polyamide 6, with
plain bore designated by the initials TN. - The housing either of zinc or
chrome plated pressed steel, and all swivel castors have two sets of ball
bearings in the head assembly.    A total stop BRAKE type B, for locking both wheel and swivel is available. Applications include commercial and domestic use, like supermarkets trolleys,
retail display equipment, food trolleys, office and laboratory trolleys,
hospital trolleys
 and heavy domestic appliances.
TB (rubber)- These type of wheels are recommended where good shock absorption ,
low noise levels, and good floor surface protection are required. These wheels
are non recommended for areas where grease, oils and solvents are present.
These are available with plate top, thread and expansion
sleeve.TN (nylon)- These type of wheels are recommended for smooth, hard floor
surfaces that are free from debris and obstruction, and where low rolling
resistance even under full load, is required. Warning: It is
important to remember that nylon wheels have a very low coefficient of friction,
and could skid on smooth floors when brake is on. (Available in plate top or thread).
These type of wheels are
available also with brake, both rubber (code: TBBP) and nylon (code: TNBP)
models. (plate and thread models only) 
Also in this category grey non-marking rubber type are available in fixed
castor with plate. (code: TBFP)
EBS - wheels for hand trolleys, skips etc.
Ambient temperature between -20 and +60 degrees.
Maximum speed : 4
|